Compressed Air Systems
  • Reciprocating
  • Rotary Screw
  • Air Treatment
  • CAS logo
    Compressed Air Systems
    Simplicity. It's What We Do.

    Reciprocating Compressors

    Engine Driven Compressors

    13-14 HP 18.4 cfm Engine Driven Compressor

    Industrial duty icon portable icon Engine Driven Icon

    CAS Industrial-duty gas and diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. The transfer tube is protected by the receiver for safety.

    With the capacity to run 1-inch impact wrenches along with any assortment of air tools, this is the compressor you need to get the job done.

    13-14 HP 18.4 cfm Engine Driven Compressor
    • Features
    • 18.4 cfm @ 175 psi
    • No Start-Up Kit Required
    • Optional 5-Year Pump Warranty
    • Access to compressor valves without compressor head removal
    • Alternator on drive engine
    • ASME tested powder coated steel tank
    • Bearings on both ends of the crank shaft
    • Centrifugal unloader
    • Critical controls protected by compressor base plate
    • Disk and spring valves
    • Drive engine on left side for safety
    • Fully enclosed belt guard
    • Full saddle mounting feet instead of pegged mounting feet
    • Heavy-duty air filter
    • Heavy-duty two-stage solid cast iron pump
    • Industrial engine
    • Needle bearings, and inserts on rods
    • Pilot valve continuous operation
    • Swedish steel valves
    • Torrington needle bearings
    • 2-grove B width drive pulley
    Model HP Tank Drive Engine Length Width Height Weight cfm @ 90 psi cfm @ 175 psi
    C130GEH33 13 30 Gallon Honda GX390 42 22 42 395 24.3 18.4
    C140GEH33 14 30 Gallon Kohler CH440 42 22 42 395 24.3 18.4
    Add E after model number to make Elite Model
    All Models
    Reciprocating
    Rotary Screw
    Air Treatment