Rotary Screw

5-10 HP RS Series Compressors

The CAS 5-10 HP screw compressors are a great fit for almost any application. The unit has a 100% duty cycle so you cannot overwork the compressor. The simple maintenance and once a year oil change has made this series a perfect fit for drycleaners, body shops, cabinet shops and many other applications. This series is the best priced screw compressor assembled in the USA.

Features:

  • Available 5 thru 10 HP
  • Operating pressures from 100 thru 180 psi
  • Low tip speeds on air end for long life
  • Less than 3 ppm oil carry over
  • One solenoid valve to operate machine
  • Quite operation
  • Spin on separator and oil filter
  • Available with receiver
  • Oil after-cooler standard on all models
  • 8000 hour full synthetic oil standard
  • Order 125, 150, 175 or 195 operating pressure at no extra charge
  • Analog controls. No unnecessary and unreliable microprocessor
  • 5-year extended warranty available for air end
 

Additional Options:

  • Compressor Enclosure
  • Y Delta starter
  • Microprocessor
  • TEFC motor

RS_shipping


Rotary Screw
5-10HP RS SERIES SCREW COMPRESSORS
Model HP CFM @150psi CFM @ 125psi Tank Size Vert/Horz Airend Voltage 1 or 3 Phase Amps @ 230 Volt
RS53V80 5 18 19 80 V NK30 208-230-460 3 16
RS53H80 5 18 19 80 H NK30 208-230-460 3 16
RS51V80 5 18 19 80 V NK30 208-230 1 24
RS51H80 5 18 19 80 H NK30 208-230 1 24
RS73V80 7.5 28 29 80 V NK30 208-230-460 3 18
RS73H80 7.5 28 29 80 H NK30 208-230-460 3 18
RS71V80 7.5 28 29 80 V NK30 208-230 1 32
RS71H80 7.5 28 29 80 H NK30 208-230 1 32
RS103V80 10 40 41 80 V NK30 208-230-460 3 28
RS103H80 10 40 41 80 H NK30 208-230-460 3 28
RS103V120 10 40 41 120 V NK30 208-230-460 3 28
RS103H120 10 40 41 120 H NK30 208-230-460 3 28
RS101V80 10 40 41 80 V NK30 208-230 1 54
RS101H80 10 40 41 80 H NK30 208-230 1 54
RS101V120 10 40 41 120 V NK30 208-230 1 54
RS101H120 10 40 41 120 H NK30 208-230 1 54