Compressed Air Systems
CAS logo
Compressed Air Systems
Simplicity. It's What We Do.

Reciprocating Compressors

Combination Packages

23 cfm Compressor/Generator/Welder/Jumpstarter

Industrial duty icon portable icon Engine Driven Icon generator icon

CAS Industrial-duty gas and diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. The transfer tube is protected by the receiver for safety.

With the capacity to run 1-inch impact wrenches along with any assortment of air tools, this is the compressor you need to get the job done.

23 cfm Compressor/Generator/Welder/Jumpstarter
  • Features
  • 23 cfm @ 175 psi
  • 6000 Watt Generator
  • 300 Amp Welder
  • 300 Amp Jump Starter
  • 300 Amp Battery Charger
  • No Start-Up Kit Required
  • Optional 5-Year Pump Warranty
  • Access to compressor valves without compressor head removal
  • Alternator on drive engine
  • ASME tested powder coated steel tank
  • Bearings on both ends of the crank shaft
  • Centrifugal unloader
  • Critical controls protected by compressor base plate
  • Disk and spring valves
  • Drive engine on left side for safety
  • Fully enclosed belt guard
  • Full saddle mounting feet instead of pegged mounting feet
  • Heavy-duty air filter
  • Heavy-duty two-stage solid cast iron pump
  • Industrial-duty engine
  • Needle bearings, and inserts on rods
  • Pilot valve continuous operation
  • Stainless steel flex lines
  • Swedish steel valves
  • Torrington needle bearings
  • 2-groove B width drive pulley
  • Options
  • Cold weather heating kit
  • DOT approved fuel cell
  • Filter regulator
  • Heavy-duty marine-grade battery
  • Skid mounted package with or without tank
  • 37 cfm @ 175 psi
  • 51 cfm @ 175 psi
  • 50 ft welding cables
  • 50 ft jump starting/charging cables
  • 50, 80 or 120 gallon tank
Model HP Mount Tank Drive Engine Length Width Height Weight
C20GEH34HC-WGJS 20 Tank 30 Gallon Horizontal Honda 50 28 44 650
C28GEC34HC-WGJS 25 Tank 30 Gallon Horizontal Kohler Gas 50 28 44 650
C26GED34HC-WGJS 26 Tank 30 Gallon Horizontal Kohler Diesel 56 36 50 700
All Models
Reciprocating
Rotary Screw
Air Treatment